ClockTuner For AMD Ryzen "Zen 2" Desktop CPUs Gets V1.1 Update

1usmus has released the latest update of his AMD Ryzen "Zen two" operation-boosting utility, ClockTuner for Ryzen. The latest update adds a range of improvements such as a new engine, several new features, and issues fixes that users encountered in the previous release for a more than refined feel.

ClockTuner For AMD Ryzen "Zen 2" Desktop CPUs Gets V1.ane Update - Available To Download, Features New Engine & A Lot More!

The ClockTuner For AMD Ryzen "Zen ii" Desktop CPUs is a tuning utility that has been designed to increment the performance of Zen 2 based CPUs that are part of the Ryzen 3000 and 3rd Gen Ryzen Threadripper lineup without increasing the power consumption. In our launch commodity for the utility, nosotros explained how CTR worked, offer a refined feel that allows users to gain functioning through a single click.

Some of the new features include profile management, reset settings push button, popular-up tooltips, record table, stats car-sharing, and a brand new engine. To install CTR i.one, you demand to have the post-obit files:

Clock Tuner for Ryzen i.1 (Guru3D Link)
.NET Framework four.8
Ryzen Master (latest)

1usmus CTR v1.1 Performance Stats:

CTR RYZEN THREADRIPPER 3960X / 3970X STATS
CTR RYZEN 3900 / 3900X / 3900XT / 3950X STATS
CTR RYZEN 3700X / 3800X / 3800XT STATS
CTR RYZEN 3600 / 3600X / 3600XT STATS
CTR RYZEN 3100 / 3300X / 3500 / 3500X STATS

Following is the full press release from 1usmus on the ClockTuner For AMD Ryzen v1.1 release.

ClockTuner For AMD Ryzen Desktop CPUs v1.1 Release Highlights

A couple of weeks ago I introduced you to the ClockTuner for Ryzen project, which is designed to better the operation of processors with the Zen 2 microarchitecture past accurately tuning each CCX. Today I am introducing a major update which, in add-on to new features, includes fixes to the problems identified.

The first thing that catches your eye is a slightly modified CTR interface.

The contour direction buttons have moved to a divide page, which tin be accessed by pressing the "PROFILE MANAGEMENT" button. The user now has 2 slot profiles to which he can record the results of the current experiment or make transmission corrections.

Annotation. If you desire to create a contour manually, you need to printing the UPDATE Profile push button after entering the values to ostend the information entry, and then y'all accept to choose whether to save the profile or merely apply information technology for the current user.

A button has been added to reset the settings and popular-up tooltips have been added. The log has been slightly transformed and additional information can be displayed in it, which will allow the user to solve problems on his own without resorting to forum discussions. As an additional assist, a button-link to the English video guide has been added to CTR 1.1 (Russian video guide will be added presently). It is located in the "Well-nigh & Assist" tab.

In "Settings mode" users can include additional settings, which volition be useful but for advanced users. That is, we have the concept of CTR in 2 clicks (DIAGNOSTIC - Outset).

CTR 1.1 got a new engine with some boosted rules. Now, before making a step to a higher frequency, CTR checks the electric current frequency with reduced voltage relative to the reference ane. In most cases, this tin can prevent BSOD during the frequency footstep or high Vdroop. Information technology besides helps to prevent the system from fake pitch to a higher frequency if the CCX is on the border of instability.

Another important advantage of the new CTR 1.1 engine is the new, secure method of controlling the frequency and voltage of the processor. This will protect user systems from sending wrong commands to registers.

The load level of stress tests has been corrected for all processors and all modes. Now uses a more loyal value of FFT, which can protect the system from BSOD.

Load Line Calibration level requirements accept been revised and thanks to the new CTR rules you tin utilize LLC in Automobile mode (in almost cases you will not need to use LLC Mode 3). This also means that ASRock and Gigabyte motherboards are fully supported.

Annotation. The "Recommended to meliorate voltage bounty" alert is information but and does not crave the user to immediately intervene in the UEFI (BIOS).

"Enhance accuracy" is a arrangement of additional frequency step burdensome using voltage. Depending on the reference voltage value, the CTR selects the optimal number of actress steps. Yes, the "tuning" process becomes longer, but the results are more than authentic.

Notation. This setting has a directly impact on your diagnostic time. If this pick is enabled, the step time is doubled to two minutes.

The diagnostic mode has received a number of improvements. Step fourth dimension was increased and the stress load was corrected using FFT. This significantly reduced the probability of BSOD. The evaluation of the cooling system allows to automatically offer the user the optimal mode. It can be an undervolting mode or an overclocking mode with the electric current PPT level saved. That is, if you use a BOX cooler, you volition be automatically offered an undervolt mode, which has a risk to reduce the processor temperature in the load upwards to xv degrees (and reduce the noise level).

The system of penalties for creating the last profile was redesigned. At present the punishment will depend on the maximum processor temperature during the diagnostics also as the current Vdroop level. This allows the profile to have some boosted stability reserve.

Note. If you lot have improved the cooling system or inverse the LLC level in UEFI (BIOS) you must rediagnosis, otherwise, the settings for the penalisation system volition not be changed.

"Autoshare stats" allows you to send the result of successful system tuning to the server. The study contains all the data available on the "Benchmark" tab. Afterward sending the result to the user, the window with the stored results on the server will automatically open up. Access to the results is open for everyone.

Note. Each class of processor has its own record table.

"CHECK STABILITY" is an opportunity to check the system for stability. Basic time is x minutes if the "Raise accuracy" selection is enabled - 20 minutes. If an mistake is found - the stress test will be stopped immediately. You may not exist afraid to leave CTR unattended.

EDC, TDC, PPT, and Max temperature values are corrected. Now the CTR protection system will not react so hard on user experiments.

Notation. EDC, TDC, PPT, and Max temperature values practise not utilise to PBO or telemetry settings, practice non affect the CPU protection system, and do not affect organization performance.

The last important innovation is the ability to use CTR without SMT. And, of course, numerous bugs have been stock-still. Improved support for the AMD Ryzen iii 3100, Ryzen 5 3500, & Ryzen 5 3500X CPU.